Группа «GT»
Велосипед GT i-Drive 7 1.0 2006
Поделиться:
- Спецификация
- Отзывы 0
- Катальцы 16
- Из этой серии 19
- Цвет
- Totally Black
- Ростовки
- Small, Medium, Large
- Рама
- New design 6061 heat treated i-Drive, with sealed main and bb pivot bearings, 7 inches of rear wheel travel
- Задние звезды
- SRAM PG -950 cassette 11-34 tooth
- Вилка
- FOX 36 Talas R, Air sprung, rebound adjustable, 20 mm through axle
- Шатуны
- Shimano Saint crank, 24, 36 chainrings, 2 piece construction with hollow forged arms and composite bash guard
- Нижний кронштейн
- Shimano outboard sealed bearing
- Педали
- Truvativ Hussefelt, heat treated Cr-mo spindles and cartridge sealed bearings
- Передний переключатель
- Shimano LX Dual Pull
- Задний переключатель
- Shimano XT
- Манетки
- Shimano Rapid Fire separate
- Цепь
- Shimano Nine Speed
- Обода
- WTB Dual Duty , free ride specific, heat treated aluminum, double wall with double eyelets
- Покрышки
- Tioga 2.5 Blue Dragon front and Tioga 2.3 Blue Dragon rear
- Передняя втулка
- Sealed bearing, 20mm through axle, cold forged, heat treated for disc brake, 36 spokes
- Задняя втулка
- Sealed bearing, 12mm through axle, cold forged, heat treated for disc brake with cro-mo steel freehub body, 36 spokes
- Спицы
- DT Swiss Champion 2.0 mm Straight gauage stainless steel
- Ниппель
- DT Swiss Chrome plated brass
- Передние тормоза
- Hayes El Camino with hydraulic fluid actuation, cold forged caliper with 180mm stainless steel rotor
- Задние тормоза
- Hayes El Camino with hydraulic fluid actuation, cold forged caliper with 160mm stainless steel rotor
- Тормозные ручки
- Hayes El Camino, open system lever with cold forged blade and reach/engagment adjust.
- Руль
- Truvativ Holzfeller, 6061 heat treated aluminum with 31.8 mm over size clamping area, 50 mm rise and 680 width
- Ножка
- Truvative Holzfeller, forged 6061 heat treated aluminum with 31.8 mm over size 4 bolt clamp
- Рукоятки
- GT Lockdown, co-molded locking grip with 2 mm allen key adjust
- Рулевая колонка
- FSA "Hammer" Cro-mo sealed bearing free ride specific, 1 1/8" with stainless steel Japanese bearings
- Сиденье
- SDG new Bel Air with two tone cover and SDG logos
- Основа сиденья
- Truvativ forged head with 2 bolt clamp, 6061 heat treated shaft 350mm
- Зажим сиденья
- Cold forged GT QR and collar with oversize blade
в нашем магазине
