Группа «GT»
Велосипед GT i-Drive 7 3.0 2006
Поделиться:
- Спецификация
- Отзывы 0
- Катальцы 16
- Из этой серии 19
- Цвет
- British Skye
- Ростовки
- Small, Medium, Large
- Рама
- New design 6061 heat treated i-Drive, with sealed main and bb pivot bearings, 7 inches of rear wheel travel
- Задние звезды
- SRAM PG -950 cassette 11-34 tooth
- Вилка
- Manitou Stance, single crown, 150 mm of travel, 20 mm through axle, preload adjustable, rebound adjustable.
- Шатуны
- Truvativ Ruktion, 24-36 heat treated steel rings with composite bash guard, steel pedal inserts
- Нижний кронштейн
- Truvativ Howitzer freeride BB with double row sealed bearings
- Педали
- Truvativ Hussefelt, heat treated Cr-mo spindles and cartridge sealed bearings
- Передний переключатель
- Shimano LX Dual Pull
- Задний переключатель
- SRAM X 7 nine speed
- Манетки
- SRAM X 7 nine speed
- Цепь
- Shimano Nine Speed
- Обода
- Alex DP-20, free ride specific, heat treated aluminum, double wall with double eyelets
- Покрышки
- Tioga 2.5 Blue Dragon front and Tioga 2.3 Blue Dragon rear
- Передняя втулка
- Sealed bearing, 20mm through axle, cold forged, heat treated for disc brake, 36 spokes
- Задняя втулка
- Sealed bearing, 12mm through axle, cold forged, heat treated for disc brake with cro-mo steel freehub body, 36 spokes
- Спицы
- Chrome plated, Stainless Steel 14 guage
- Ниппель
- Chrome plated brass
- Передние тормоза
- Hayes Sole, hydraulic fluid actuation, cold forged caliper with 180mm stainless steel rotor
- Задние тормоза
- Hayes Sole, hydraulic fluid actuation, cold forged caliper with 160mm stainless steel rotor
- Тормозные ручки
- Hayes Sole open system lever with cold forged blade.
- Руль
- Truvativ Hussefelt, 6061 heat treated aluminum with 31.8 mm over size clamping area, 50 mm rise and 680 width
- Ножка
- Truvative Hussefelt, forged 6061 heat treated aluminum with 31.8 mm over size 4 bolt clamp
- Рукоятки
- GT Lockdown, co-molded locking grip with 2 mm allen key adjust
- Рулевая колонка
- FSA "Hammer" Cro-mo sealed bearing free ride specific, 1 1/8" with stainless steel Japanese bearings
- Сиденье
- SDG new Bel Air with two tone cover and SDG logos
- Основа сиденья
- Truvativ forged head with 2 bolt clamp, 6061 heat treated shaft 350mm
- Зажим сиденья
- Cold forged GT QR and collar with oversize blade
в нашем магазине
