Группа «Specialized»
Велосипед Specialized Fuse III 2005
Поделиться:
- Спецификация
- Отзывы 0
- Из этой серии 26
- FRAME:
- 100% Cr-Mo, 40mm TT/DT, euro BB, internally relieved No Oval head tube, weld-on rotor plate, dual lower brake cable routing, 6mm drop-outs for 14mm axle
- FORK:
- Cr-Mo 1-1/4? blades, reinforced steer, 6mm drop-outs for 14mm axle with 38mm OD Safety washers
- HEADSET:
- 1-1/8? threadless, sealed loose ball bearing
- ROTOR:
- SST Oryg with dual cable amplifier
- STEM:
- Forged alloy, 55mm reach, top-load
- HANDLEBARS:
- 100% Cr-Mo 2-piece, 195mm rise x 620 width, 10 deg. backsweep, 5 deg. upsweep
- TAPE / GRIPS:
- Specialized no-flange Kraton, 130mm
- BRAKES:
- Rear only: Dia-Tech 996 "Hombre" U-brake, dual quick release arms
- BRAKE LEVERS:
- Tektro ?U-Brake? alloy, two finger
- FREEWHEEL:
- Odyssey, 1/2x1/8x13t for M-30 thread(left side)
- CHAIN:
- KMC Z-510H
- CRANKSET:
- Truvativ Luftalarm XR, AL-7050, L & R drive compatible, 175mm
- CHAINRING:
- CNC cut 5mm thick 7075, 1/2? x 1/8?x 36t
- BOTTOM BRACKET:
- Truvativ Giga Pipe BMX, 68x113mm ISIS spline, Cr-Mo spindle, Alloy cups with 4x sealed cartridge bearing
- PEDALS:
- Alloy platform, 9/16? spindle Cr-Mo spindle with molded pins
- RIMS:
- Front: SUN Rhyno Lite XL, 20x1.75" double wall, eyelets. Rear: SUN Rhyno Lite XL L7, 20" double wall, CNC sidewalls, eyelets
- FRONT HUB:
- Specialized 36 hole, alloy shell, mid flange, hollow 14mm Cr-Mo axle, double sealed loose ball
- REAR HUB:
- Specialized 36 hole, ?Flip-side Freewheel? L&R side M-30 f/w threads, alloy shell, mid flange, hollow 14mm Cr-Mo axle, 4x sealed cartridge bearings
- SPOKES:
- 2.0mm (14g) stainless steel, brass nipples, L189/R189mm front, L186/R186mm rear
- FRONT TIRE:
- Specialized ?Compound? Sport, 30tpi, 20x2.0"
- REAR TIRE:
- Specialized ?Compound? Sport, 30tpi, 20x2.0"
- TUBES:
- 20x 2.0" schraeder valve
- SADDLE:
- Specialized Jumping with 8mm rails and X-Brace
- SEAT POST:
- Alloy micro adjust, 30.9mm/300mm for 8mm rails
- SEAT BINDER:
- Forged alloy single bolt design 33.3 x 31.3mm
- NOTES:
- 2 x axle peg, 38mm OD chain tensioner, chainguard cover, reflectors, owners manual
