Группа «Specialized»
Велосипед Specialized Fuse II 2004
Поделиться:
- Спецификация
- Отзывы 0
- Из этой серии 12
- FRAME:
- Cr-Mo main tube(TT/DT/ST), internally relieved No Oval head tube, weld-on rotor plate, dual lower brake cable routing w/ amplifier, 6mm drop-outs for 14mm axle
- FORK:
- Hi-Ten, reinforced steerer w/ internal thread for alloy compression bolt, 1-1/4" blades, 6mm drop-outs for 14mm axle
- HEADSET:
- Dozer 1 1/8" threadless, sealed loose ball bearing
- ROTOR:
- SST Oryg w/ dual cable amplifier
- STEM:
- Forged alloy, 55mm reach, top-load
- HANDLEBARS:
- Hi-Ten 2 piece, 195mm rise x 620 width, 10 deg. backsweep, 4 deg. upsweep
- TAPE / GRIPS:
- Specialized no-flange Kraton, 130mm
- BRAKE:
- Rear only: Tektro "U-Brake", coil spring, dual quick release arms
- BRAKE LEVER:
- Tektro "U-Brake" alloy, two finger
- FREEWHEEL:
- ACS Main Drive, 1/2x1/8x16t
- CHAIN:
- KMC Z-510
- CRANKSET:
- Specialized 3-piece, forged & heat-treated Cr-Mo, 175mm
- CHAINRING:
- CNC cut 5mm thick 6061-T6, 1/2" x 1/8"x 44t
- BOTTOM BRACKET:
- Heat treated Cr-Mo 8 spline 19mm spindle, sealed loose ball bearings
- PEDALS:
- Alloy platform, 9/16" spindle Cr-Mo spindle, molded pins
- RIMS:
- Sun ZX-25, 20", ground sidewalls
- FRONT HUB:
- 36 hole, alloy shell, mid flange, solid 14mm Cr-Mo axle, double sealed loose ball
- REAR HUB:
- 36 hole, "Flip-Side Freewheel" L&R side f/w threads, alloy shell, mid flange, solid 14mm Cr-Mo axle, double sealed loose ball
- SPOKES:
- 2.0mm (14g) UCP, brass nipples, L187/R187mm front, L185/R185mm rear
- FRONT TIRE:
- Specialized "Compound" Sport, 30tpi, 20x2.0"
- REAR TIRE:
- Specialized "Compound" Sport, 30tpi, 20x2.0"
- TUBES:
- 20x 2.0" schraeder valve
- SADDLE:
- Specialized Jumping with 8mm rails and X-Brace
- SEAT POST:
- Alloy micro adjust, 30.9mm/300mm for 8mm rails
- SEAT BINDER:
- Forged alloy single bolt design 33.3 x 31.3mm
- NOTES:
- 2 x axle peg, 38mm OD chain tensioners, chainguard cover, reflectors, owners manual
в нашем магазине
